Keep an on Hakko

Return to Previous Page

FP-102 Soldering Station

FP-102 Soldering Station

STATION,SDRG,ESD,w/o TIP,FP-102

Part Number: FP102-01

Status: Discontinued

Question about this Product?
Contact us!
SOLDERING STATION

The FUTURE PRODUCT FP-102 is a low cost, high performance soldering station that delivers! The FP-102 features:

  • an iron with a unique cartridge and soft grip design that allows cartridges with different tips and removable ergonomic grips to be quickly and easily replaced
     
  • built in patent pending heating element
     
  • tip temperature can be changed without changing the tip
     
  • four pre-set nominal soldering temperatures to choose from at the touch of a button
     
  • over 75 tip configurations available
     
  • once the tip temperature is set, it is “locked” into the system memory and cannot be changed without the lockout key card
     
  • red ring LED in connector stays illuminated when the iron is hot (patent pending feature)
     
  • can be used as a desoldering station with the FM-2024 Desoldering Tool
     
  • ESD-safe by design

    UPGRADE your FM-2021 Handpiece
    to the
    New FM-2027 Locking Connector = CLICK HERE


FOR ALL ACCESSORY PRODUCTS
CLICK HAND Thank You!


Part Number: FP102-01
(see Specifications for more details)
 

NOTE: The FP-101 and the FP-102 share the same specifications and features and benefits with one exception: the FP-102 has the ability to operate the FM-2024 Desoldering Tool. For more information, please visit the FM-2024 web page in the Desoldering Section.

 

 

Model Name FP-102
Part Number FP102-01
Power Consumption 75W
Nominal Temperature Ranges 6.5
~343°C
~650°F
7.0
~371°C
~700°F
7.5
~399°C
~750°F
8.0
~427°C
~800°F
Temperature Stability ±5°C (±9°F) at idle temperature
Station
Output Voltage 24V
Outer Dimensions 120(L) x 93(W) x 140(H) mm
4.7(L) x 3.7(W) x 5.5(H) in.
Weight 1.4 kg (3.1 lbs.)
Soldering Iron
Power Consumption 70W (24V)
Tip-to-Ground Resistance Under 2 ohms
Tip-to-Ground Potential Under 2mV
Total Length (w/o cord) 188 mm (7.4 in.) with T7-D24 tip
Weight     (w/o cord) 30 g (0.067 lb./1.07 oz.) with T7-D24 tip
Cord 1.2m (4 ft.)

CONTENTS

Part Number Description
  FP-102 Soldering Station
FM2027-02 FM-2027 Locking Connector Assembly
Y=B3216
O=B3217
B=B3218
G=B3219
Yellow, Orange, Blue or Green
Sleeve Assembly (grip)
FH100-01
replaces
634-01
Iron Holder
B2839 Control Card with chain
B2300 Heat Resistant Pad
B2756 Tip Tray