Keep an on Hakko

Return to Previous Page

Hakko Outlet

FR-803 Rework System (Refurbished)

FR-803 Rework System (Refurbished)

The Hakko FR-803B Hot Air Rework Station has an integrated temperature sensor that allows for dependable and accurate temperature control. The unique nozzle outlet provides consistent temperature of the hot air stream generated by the unit.

This item has been replaced by FR810B-05


Note: This item has been refurbished and may show nicks or scratches that do not affect performance.

Part Number: FR803-11

Availability: In stock

Status: Discontinued

List Price: $1,299.97

Special Price $325.00

Question about this Product?
Contact us!
-
+
DIGITAL SMD REWORK STATION

The Hakko FR-803 is one of the new generation of SMD rework systems. The integrated temperature sensor allows for consistent and accurate temperature control, and the unique air stream outlet design allows for consistent temperatures of the hot air stream generated by the unit.

The Hakko FR-803 provides three programmable 3-step rework profiles that are stored in the unit's memory, allowing for easy recall and consistent operation.

Use the lockout key card to enter temperature settings into the system memory, then when the card is removed, all parameter settings are “locked” into the system memory and cannot be changed without the key card. This feature guards against an operator making accidental or unauthorized temperature changes.

Built-in power save feature automatically turns the hot air stream off if the unit has not been stopped for a pre-selected (30 or 60 minutes) amount of time.

The FR-803 also features:

• digital LED temperature display (°F or °C)

• digital hot air dwell time display

• an integrated temperature sensor that allows for consistent and accurate temperature control

• a unique nozzle outlet for consistent temperature of the hot air stream generated by the unit

• a self-contained air source

• easy-to-read variable airflow meter

• automatic cool-down automatically engages when stop button pressed

• compact design uses less work area than previous models

• built-in vacuum pick-up

• two modes of operation
   Manual:  Simple operation
   Auto:  Programmable process control


• ESD safe by design


Part Number: FR803-11
(see Specifications for details)







 

SPECIFICATIONS

Model Hakko FR-803
Part Number FR803-11
Station
Total Power Consumption 120V - 430W
Station Power Consumption 30W (Stand-by Mode: 4W)
Handpiece Power Consumption 400W
Pump Type Diaphragm pump
Pump Capacity 5 to more than 20 l/min.
Control Temperature*
100 to 450°C
(212 to 842°F)
 *measured at heater sensor
 
Operating modes Manual and Automatic
Timer 3 file/step
Handpiece Length
(w/o cord)
200 (L) mm (7.9 in)
Handpiece Weight (w/o cord) 200 g (0.44 lb.)
Outer Dimensions 160(W) x 145(H) x 230(D) mm
[6.3(W) x 5.7(H) x 9.1(D) in.]
Weight 5.0 kg (11.02 lbs.)

Note: Specifications subject to change without notice

Contents
 

Name Part Number Quantity
FR-803 Station n/a 1
Power cord   1
Handpiece holder   1
Pads:
Ø3, Ø5, Ø7.6 mm
  2 each
Vacuum pipe control knob (L)   1
Control card   1
Manual n/a 1

 

APPROVED

 

Note: Station does not include nozzles. Nozzles must be purchased separately.

FR-800 Series Hot Air Rework Stations