- Home Home
- Products Products
- Support Support
- What's newWhat's new
- Videos Videos
- Where to buy Where to buy
- Gift Shop Gift Shop
- Hakko OutletHakko Outlet
The shape of the interchangeable guide rail (Patent pending) assists the operator to safely place and maneuver the PCBs until the cut is completed. This prevents damage to the PCB should the operator insert the wrong size guide rail that does not match perfectly with the geometry and size of the panel’s slot.
• VACUUM PUMP & FILTER SYSTEM
A powerful vacuum pump is mounted directly under the table top, and a vacuum hose connected at the guide rail removes the PCB dust at the source for a clean and healthy work environment.
The fine dust particles are collected by a polyester filter cartridge that is easy to access and clean.
• ESD TABLE CONSTRUCTION
The table is made of steel with a laminated ESD table top to protect against electrostatic discharge.
• MINIMUM VIBRATION
The table’s steel construction provides a sturdy and stable working platform, and the high speed precision spindal operates at speeds up to 60,000 rpm with minimal vibration.
ESD zinc coated steel front feet and heavy duty rear casters make the system easy to move to another location.
Guide rail and milling bits NOT included and must be purchased separately
|Dimensions||64 x 70 x 95 cm (25 x 28 x 37 in)|
|Necessary Space||164 x 170 cm (65 x 67 in)|
|Weight||55 kg (121 lbs)|
|Supply Pressure||6 bars (87 psi) - 6 mm ø connection pipe|
|Compressed Air Consumption||Max. 210 L/min. Average 140 L/min|
|Depression||22 kPa (220 mbar)|
|Micro-spindle Speed||60,000 RPM Max.|
|Noise Level||90 dB(A) - Uncertinaty 3 dB(A) detected on the operator position|
|Thickness||Max. 2.5 mm|
|Slot Length||Min. 10.5 mm|
|Slot Width||1.5 - 2.5 mm|
|Slot Width Tolerance||0 / -0.02 mm|
|Isthmus Distance From Components||min. 1 mm|
|PCB Material||FR4/ CEM/ Aluminum*|
* For aluminum depaneling, contact American Hakko Products, Inc. for the milling bit specifications.
What's in the box?
|Depaneling System|| DPF-200-E
|Pneumatic Lubricator, 1L|| --
|2 mm Hex Key (for interchangeable guide)|| --
|3 mm Hex Key (for support head)|| --
|9 mm Wrench X2 (for milling bit)|| --
|Screw For Interchangeable Guide X4||--|
|Replacement Milling Bit Fitting|| --
|Dust Filter Certification||--|
|Adjustable Wrist Strap||SC-0807|
|Specification Change on DPF-200 Depaneling System(250.14 KB )||Download|
|CHP DPF-200 Depaneling System — New EBP(221.08 KB )||Download|
|CHP DPF-200 Depaneling System - Instruction Manual(1.12 MB )||Download|
|CHP DPF-200 Depaneling System — Brochure(230.04 KB )||Download|
|CHP DPF-200 Depaneling System — Product Bulletin(435.28 KB )||Download|