Important Notice: Despite recent events surrounding COVID-19 and new state-wide restrictions in California, American Hakko Products, Inc. continues to operate at 100% efficiency. We'd like to reassure our customers that we have sufficient inventory to meet demand and our supply lines to our factories that remain open.

Keep an on Hakko

Return to Previous Page

2 Layer Rubber

36" x 32 ft. Two Layer Synthetic Rubber ESD Mat

36" x 32 ft. Two Layer Synthetic Rubber ESD Mat

Made from high quality nitrile butadiene rubber (NBR) with a conductive bottom layer and dissipative top layer. Surface is a smooth, semi-gloss surface that is easy to clean and hot solder resistant with a non-skid backing. The material is resistant to most chemicals found in assembly areas and provides durability and excellent electrical performance.


Available color: Blue


*All mat sold in rolls of 32 linear feet, optimized for shipping, handling, and scrap reduction

Part Number: SC-0107

Status: Discontinued

Question about this Product?
Contact us!

• 2 mm Total Thickness

• 1.5 mm Dissipative Layer

• 0.5 mm Conductive Layer

• Meets or exceeds various ESD Standards

• < 0.1 sec charge decay time

• RTT/RTG 1 x 107 to 9 x 108 ohm 

Specifications

 Part No.  SC-0107
 Base Material  Nitrile Butadiene Rubber
   Dissipative Layer  | Conductive Layer
 Tensile Strength (min)  100 Kg/cm2         | >70 Kg/cm2
 Elongation (min)  5                        | 2.5
 Surface Resistance  < 108 Ω              | 104 Ω
 Thickness  1.5 mm               | 0.5 mm
 Hardness (Shore A)  65 ±5
 Tear Strength (min)  25 Kg/cm
 Resistance-Top to Top  RTT:1 x 107 to 9 x 108 Ω
 Resistance-Top to Ground  RTG:1 x 107 to 9 x 108Ω~
 Charge Decay Time  Less Than 0.17s~
 Total Thickness  0.08" (2 mm)
 EOS/ESD S4.1 RTG Compliant  Yes
 ANSI/ESD S541-2003 Compliant  Yes
 FSTM 101 M4046 Compliant  Yes
 RoHS Compliant  Yes
 REACH Compliant  Yes
 Heat Resistance  195oF
 Colors  Blue, Green, Grey
 Surface Finish  Smooth - semi glossy
Download Attachment
36" x 32 ft. Two Layer Synthetic Rubber ESD Mat

36" x 32 ft. Two Layer Synthetic Rubber ESD Mat

Made from high quality nitrile butadiene rubber (NBR) with a conductive bottom layer and dissipative top layer. Surface is a smooth, semi-gloss surface that is easy to clean and hot solder resistant with a non-skid backing. The material is resistant to most chemicals found in assembly areas and provides durability and excellent electrical performance.


Available color: Blue


*All mat sold in rolls of 32 linear feet, optimized for shipping, handling, and scrap reduction
















































































Current Hakko User:

 

Request Catalog:

 

Request Demo: