Return to Previous Page

FR-410 High Power Desoldering Station

FR-410 High Power Desoldering Station with Gun-Style Desoldering Tool

FR-410 High Power Desoldering Station with Gun-Style Desoldering Tool

140W high power desoldering station with unique features that increases work efficiency, including newly designed selection of nozzles for a variety of desoldering applications.

Part Number: FR410-02

Availability: Backordered

List Price: $949.97

Question about this Product?
Contact us!

As the design of PCBs evolve, the need for higher power desoldering tools with a wide arrange of nozzle configurations grows. The HAKKO FR-410 desoldering station is designed to fit that need and bridge the gap in power between the 70W HAKKO FM-204 desoldering station and the 300W HAKKO FR-400 ultra heavy duty desoldering station.

The HAKKO FR-410 provides 140 watts of power and has the widest selection of nozzle configurations that can meet almost every need. The station includes the same popular features from the HAKKO FR-400, which include an anti-clogging feature that helps ensure instantaneous application of peak vacuum pressure to the solder joint.

Other features include:

• a delay timer to prevent premature release of the vacuum system before solder has cleared the heater and is captured in the solder collection chamber

• a large easy to read display that includes a vacuum level indicator to let you know if there are restrictions building that will need to be cleaned out

• 3-user programmable presets

• process control password lockout to prevent any unauthorized changes to the system's operation or setup

• two variations — gun-type (FR-4101) desoldering handpiece, or pencil-type (FR-4102) desoldering handpiece

• each handpiece has a easy access solder collection chamber that is simple to clean

• easy to change heater cartridge with HAKKO Composite Ceramic technology

• an independent nozzle, which provides a low cost of operation

• and a basic maintenance kit with a variety of basic cleaning tools and replacement filters.

Part Number: FR410-02 (includes Gun-Type desoldering handpiece FR-4101)

Part Number: FR410-03 (includes Pencil-Type desoldering handpiece FR-4102)


Model Number FR-410
Part Number FR410-02
w/FR-4101 Gun-Type
w/FR-4102 Pencil-Type
Input Voltage 120VAC 50/60 Hz
Power Consumption 190W
Temperature Range 620° - 850°F (330°C - 450°C)
Temperature Stability ±9°F (±5°C) at idle
ESD Safe Yes
Safety Approval



Output Voltage 24V
Vacuum Generator Pump - Double Cylinder
Vacuum Pressure (max) 80 kPa / 600 mm Hg (24 in. Hg)
Suction Flow 15 L/min
Temperature Control Microprocessor control
using closed-loop sensor
Temperature Presets 3-User Programmable
Sleep Enabled Yes
Auto Power Off Safety Yes
Low Temp Alarm Yes
Process Control Lockout Yes - Password
(W x H x D)
6.5 x 5.4 x 9.6 in.
165 x 137 x 244 mm
Weight (w/o cord) 10.6 lb. (4.8 kg)



Model FR-4101 (Gun) FR-4102 (Pencil)
Part Number FR4101-81 FR4102-81
Power Consumption 140W
Nozzle-to-Ground Resistance < 2 ohms
Nozzle-to-Ground Potential < 2 mV
Heater HAKKO Composite Ceramic™
Nozzles N61 Series
Standard Nozzle (included) N61-05 (1.0 mm / 0.04 in.)
Cord Length 4 ft. (1.2 m)
Total Length (w/o cord)† 6.6 in. (168 mm) 8.1 in. (206 mm)
Weight (w/o cord)† 0.38 lb. (170 g) 0.35 lb. (160 g)

As measured with N61-05 nozzle installed



Part Number Description
- - FR-410 Desoldering Station
- or -
FR-4101 Gun-Type Desoldering Handpiece
- or -
FR-4102 Pencil-Type Desoldering Handpiece
- or -
Handpiece Holder with cleaning sponge for FR-4101
- or -
Handpiece Holder with cleaning sponge for FR-4102
C5030 Maintenance Kit
• B1087 - 1.0mm Cleaning Pin
• B1215 - Heater Cleaning Pin
• B1303 - 1.0mm Cleaning Drill
• B5106 - Nozzle Wrench
• A5020 - Station Filter (x2)
• A1033 - Handpiece Filter (x4
B2419 Power Cord
- - Instruction Manual

FR-410 High Power Desoldering Station