• New, wider selection of nozzle configurations
• Large, easy-to-read display that includes a vacuum level indicator
• Three (3) user-programmable presets
• Password lockout to prevent any unauthorized changes to the systems operation or setup
• Vacuum system with .02 second delay timer to prevent nozzle clogging
• Easy-access solder collection chamber that is simple to clean
• Easy-to-change heater cartridge with American Hakko composite ceramic technology
• Independent nozzle which provides a low cost of operation
FR-410 High Power Desoldering Station Alternate Options
FR410-02 Gun Style
Specifications
Model Name | FR-410 | |
Part No. | FR410-03 | |
Input Voltage | 120 VAC 50/60 Hz | |
Power Consumption | 190W | |
Temperature Range | 330° - 450°C (620° - 850°F) | |
Temperature Stability | ±9°F (±5°C) at idle | |
ESD Safe | Yes | |
Safety Approval |
|
|
Station | ||
Output Voltage | 24V | |
Vacuum Generator | Pump - Double Cylinder | |
Vacuum Pressure (max) | 80 kPa / 600 mm HG (24 in. Hg) | |
Suction Flow | 15 L/min. | |
Temperature Control | Microprocessor control using closed-loop sensor | |
Temperature Presets | 3-user Programmable | |
Sleep Enabled | Yes | |
Auto Power Off Safety | Yes | |
Low Temp Alarm | Yes | |
Process Control Lockout | Yes-Password | |
Dimensions (W x H x D) | 6.5 x 5.4 x 9.6 in. (165 x 137 x 244 mm) | |
Weight (w/o cord) | 10.6 lbs. (4.8 kg) | |
Handpiece | ||
Model No. | FR-4102 (Pencil) | |
Part No. | FR4102-81 | |
Power Consumption | 140 W | |
Nozzle to Ground Resistance | < 2 Ohms | |
Nozzle to Ground Potential | < 2 mV | |
Heater | HAKKO Composite Ceramic™ | |
Nozzles | N61 Series | |
Standard Nozzle (included) | N61-05 (1.0 mm / 0.04 in.) | |
Cord Length | 4 ft. (1.2 m) | |
Total Length (w/o cord)† | 8.1 in. (206 mm) | |
Weight (w/o cord) | 0.35 lbs. (160 g) |
† As measured with N61-05 nozzle installed
What's in the box?
Description | Part No. |
FR-410 Desoldering Station | -- |
FR-4102 Pencil-Type Desoldering Handpiece | FR4102-81 |
Handpiece Holder with cleaning sponge | FH410-02 |
Maintenance Kit that includes: B1087 - 1.0 mm Cleaning Pin B1215 - Heating Cleaning Pin B1303 - 1.0 mm Cleaning Drill B5106 - Nozzle Wrench A5020 - Station Filter (x2) A5044 - Handpiece Filter (x4) |
|
Standard Nozzle | N61-05 (1.0 mm / 0.04 in.) |
Power Cord | B2419 |
Instruction Manual | -- |
Using just 140 watts of power, this station is excellent for desoldering components on multi-layer circuit boards, including those with difficult to reach areas and narrow spaces. This station has improved features to make it easier to use and increase efficiency, including an Anti-Clog Function (ACF) and display, larger and easier-to-change filter, and easier, safer nozzle replacement.
This part number has been replaced by FR410-53.
Using just 140 watts of power, this station is excellent for desoldering components on multi-layer circuit boards, including those with difficult to reach areas and narrow spaces. This station has improved features to make it easier to use and increase efficiency, including an Anti-Clog Function (ACF) and display, larger and easier-to-change filter, and easier, safer nozzle replacement.
This part number has been replaced by FR410-53.