- Home Home
- Products Products
- Support Support
- What's newWhat's new
- Videos Videos
- Where to buy Where to buy
- Gift Shop Gift Shop
- Hakko OutletHakko Outlet
FUME AND SMOKE EXTRACTION SYSTEM
The Hakko FA-430 fume extraction unit is designed expressly for use at soldering stations, extracting the contaminated air directly at the source. (Shown above: Loc-Line duct with rectangular nozzle.)
Contaminated air is captured from the workplace surrounding the soldering station by the hood or hoods, and transferred to the FA-430 unit by rigid ducts, and a special replacement filter notification function notifies the operator when the filter needs to be replaced.
Inside the unit, two filters, comprising three stages of filtering, remove the contaminants from the air. The purified air is then returned to the area where the FA-430 is located.
The pre-filter removes coarse particles, such as dust, thus extending the life of the main filter. The main filter provides the greatest amount of surface area within the volume of the filter case.
The standard filters contain an activated carbon element built into the filter. This filter is designed to last the life of the main filter.
• Powerful suction
• Quiet operation
• 3-airflow adjustment modes: High, Medium, Low
• Free standing ducts
• To maintain optimum filtering efficiency, special filter replacement indicators on the front panel notify you when it is time to replace the filters.
• Kit includes duct kit with round nozzle
|Power Consumption||110W / 120VAC|
|Max. Airflow (w/ single duct)||4.1 m3/min (145 cfm)|
|Max. Airflow (w/ two ducts)||4.7 m3/min (167 cfm)|
|Vacuum Pressure||1500 Pa (0.44 in. Hg)|
|Filtering Efficiency|| >98% 0.3µm
(capable of 99.97% @ 0.3µm)
|Noise Level||44 - 53 dB @ 1m|
|Dimensions|| 330 (W) x 366 (H) x 343 (D) mm
(13.0 x 14.4 x 13.5 in.)
|Weight||7.5 kgs (16.5 lb.)|