- Home Home
- Products Products
- Support Support
- What's newWhat's new
- Videos Videos
- Where to buy Where to buy
- Gift Shop Gift Shop
- Hakko OutletHakko Outlet
FUME AND SMOKE EXTRACTION SYSTEM
The HJ3100 fume extraction unit is designed expressly for use at soldering stations, extracting the contaminated air directly at the source. (Shown above: Loc-Line hose with rectangular hood sold separately. See Accessories for details.)
The HJ3100 is a high-mass flow, low vacuum system. Contaminated air is captured from the workplace surrounding the soldering station by the hood or hoods, and transferred to the HJ3100 unit by flexible or rigid ducts.
Inside the unit, two filters, comprising three stages of filtering, remove the contaminants from the air. The purified air is then returned to the area where the HJ3100 is located.
The pre-filter is made of a treated polyester material that removes coarse particles, such as dust, thus extending the life of the main HEPA filter. The HEPA (High Efficiency Particulate Air) filter consists of a pleated fiberglass paper medium, providing the greatest amount of surface area within the volume of the filter case.
The standard filters used in the HAKKO HJ3000-series fume extractors contain an activated carbon element built into the filter. This filter is designed to last the life of the main HEPA filter. Carbon filters have absorption ratings of 80-85%.
Efficiencies of the various HEPA/carbon filters for the HJ3100 are greater than 98% at 0.3 microns. All tests per the DOP test as stipulated in MIL-STD-282.
A wide range of accessories are available.
Part Number: HJ3100 (see Specifications for details)
|Input Voltage||115VAC - 50/60 Hz|
|Motor Type||PSC - Thermally Protected|
|Vacuum Pump/Blower Rating||One Port: 100CFM
Two Ports: 180CFM (305 cu.m/h)
|Filters||Pre-filter and HEPA/Carbon combination|
|Dimensions||11(W) x 9(D) x 18(H) in.
27.94(W) x 22.86(D) x 45.72(H) cm
|Approx. 18 lbs. (8.16 kgs)|
|Discontinuation of 2(16.36 KB )||Download|
|Introduction of the Silencer for the Hakko HJ3100 Fume Extraction System (999-210)(27.02 KB )||Download|
|Discontinuation of various 3(15.02 KB )||Download|
|Introduction of the Hakko HJ3100-05 Fume Extraction System with standard 4-port cover(685.44 KB )||Download|
|Change of duct included with the HJ3100-02(101.78 KB )||Download|
|Our Friend the Decibel(38.65 KB )||Download|
|HJ3100 Users Manual (Rev 2000-05-F-ul)(245.87 KB )||Download|
|HJ3100 Users Manual (Rev 2000-05-E)(276.15 KB )||Download|
|Discontinuation of Hakko HJ3100 Silencer(341.29 KB )||Download|
|Discontinuation of Hakko 999-137 Combo/Hepa Filter(297.72 KB )||Download|
|Discontinuation of Hakko HJ3100 Fume Extraction System(429.88 KB )||Download|
|HJ3100 Users Manual (Rev 2000-05-G-ul)(247.41 KB )||Download|
|Change of duct included with the HJ3100-01(101.8 KB )||Download|
|Introduction of the Alsident kits for the HJ3100(123.79 KB )||Download|
|Introduction of a new ESD safe duct for the Hakko HJ3100 (999-194)(281.46 KB )||Download|
|Introduction of a new ESD safe round hood for the HJ3100 (999-195)(213.22 KB )||Download|
|HJ3100 Users Manual (Rev 2000-05-D)(427.29 KB )||Download|
|The Purpose of Fume Extraction(59.44 KB )||Download|
|HEPA tests and other matters(67.64 KB )||Download|
|Introduction of the new ESD safe rectangular hood for the HJ3100 (999-196)(198.45 KB )||Download|
|Introduction of the adapter used to attach the new ESD safe duct to the HJ3100 (999-197)(175.33 KB )||Download|
|Introduction of the Loc-Line kits for the HJ3100(114.39 KB )||Download|
|Introduction of the Bench Top Hood kits for the HJ3100(113.05 KB )||Download|
|Discontinuation notice of the two port by four inch cover for the HJ3100(80.03 KB )||Download|
|Introduction of New Odor/Fume Filter for Hakko HJ3100 Fume Extraction Unit(149.06 KB )||Download|
|Recommended configuration of the HJ3100 with new duct and hoods(95.71 KB )||Download|
|HJ3100 is not for flammables, etc.(20.93 KB )||Download|