- Home Home
- Products Products
- Support Support
- What's newWhat's new
- Videos Videos
- Where to buy Where to buy
- Gift Shop Gift Shop
- Hakko OutletHakko Outlet
The Hakko Soldering Kit for Universal Robots is a soldering iron and solder wire feeder that enables the robot to perform manual soldering tasks. This product is ideal for automating virtually any hand soldering process by increasing overall throughput and consistency of the solder joints.
The FU-500 Intelligent Solder Feeder lends a helping hand to automatically feed the solder wire to a specific position and allows for easy adjustment of the solder feed position, which is critical for automated systems. The Intelligent Solder Feed Unit also features a compact driver unit that allows the feed to be brought closer to the iron, increasing the accuracy of the amount of solder fed.
With an optical sensor, the FU-500 can detect solder clogging, slipping, and the end of the solder roll. The Intelligent Solder Feeder is also equipped with a mechanism that perforates into the solder wire as a countermeasure against flux and solder splash.
The FU-601 Robotic Integration Soldering Module features Hakko’s reliable, high-performance composite tips with accurate temperature for consistent solder joints. The tips can also be easily and quickly replaced then realigned using the tip alignment tool.
|Part No.||FU500-21X (L Type)|
|Input Voltage||127 VAC 50/60 Hz|
|Weight w/o Cord||5.1 lb. (2.3 kg)|
5.7 x 3.9 x 9.1 in.
|Feeder Weight||1.8lb. (800g)|
|Compatible Solder Diameters||0.3 - 1.6 mm|
|Input Voltage||120 VAC 50/60 Hz|
|Temperature Range||120°F – 940°F (50°C – 500°C)|
|Outer Dimension (W x H x D)|| 5.7 x 4.2 x 8.3in.
(145 x 107 x 211mm)
|Weight (w/o Cord)||8.8 lb. (4kg)|
|Part No.||FU6002-01X (L-Shaped Iron)|
|Power Consumption||260W (29V)|
|Tip-to-Ground Resistance||< 2ohms|
|Tip-to-Ground Potential||< 2mV|
|Heater||Composite Ceramic Cartridge|
|Tips1||TX1 and TX2 Series|
|Cord Length||16.4 ft. (5 m)|
|Total Length (w/o Cord)2|| 6.6 in. (168 mm)
|Weight (w/o Cord)2|| 0.38 lb. (173g)
1Tips not included
2As measured with TX2-4XD tip installed
What's in the box?
|FU-500 Solder Feed Unit||FU500-21X|
|Feeder Unit (L Type)||CX1010|
|Tube Unit (0.3-1.0 mm)||BX1041|
|Tube Unit (1.2-1.6 mm)||BX1042|
|Solder Reel Stand||BX1057|
| FU-601 Station
| Soldering Handpiece (Straight)
| Iron Mount
| Tip Alignment Tool (TX1)
| Tip Alignment Toool (TX2)
| Iron Cable
| Connecting Cable
|Feeder Unit Attachment Screw||--|
|Heat Resistant Pad||B2300|
|ACCESSORIES FOR UR|
|End Effector Mount for UR||555-300|
|PNP to NPN Adapter||555-309|
To configure the FU-500 for use with your soldering application, select the Feeder Drive, Guide Pipe Assembly, and PTFE Tube Insert based on the diameter of the solder you will be using. These parts are sold seperately, but are required for the station to be operational.
|0.3 mm||0.5 mm||0.6 mm||0.8 mm||1.0 mm||1.2 mm||1.6 mm|
|Guide Pipe Assembly||BX1007||BX1008||BX1009|
|PTFE Tube Insert||BX1010||BX1011||BX1012||BX1013||BX1014||BX1015|