- Home Home
- Products Products
- Support Support
- What's newWhat's new
- Videos Videos
- Where to buy Where to buy
- Gift Shop Gift Shop
- Hakko OutletHakko Outlet
This short 45 second video showcases some of the new enhanced features of the FT-802, which include an integrated handpiece holder on top of the station to maximize bench space, a hands-free blade removal plate, set screws to ensure blade alignment, an ergonomic heat resistant handpiece, and HAKKO G4 blades with superior thermal performance.
Available April 1, 2019
In this video we test the resistance of a Static Shield Bag per Standard Test Method ANSI/ESD S11.12 and S11.11 with a 5 lb. electrode and a resistance meter.Send to a Friend
The CHP brand offers a vast selection of precision tools including, cutters, pliers, shears, wire strippers, lead formers, depaneling tools, and tweezers. The CHP cutters exhibit the same high quality performance of a forged tool but at a fraction of the cost.Send to a Friend
The CHP high-quality ESD products will help prevent and protect against electrostatic discharge (ESD) that can occur on the workbench.
The CHP supplies include, grounding kits, wrist and heel straps, gloves, finger cots, static shield bags, tapes, labels and floor and bench mats, all at a reasonable price!
The CHP DFP 200 is a manual router table for depaneling printed circuit boards from a panel or multi-block. The DPF 200 milling cutters (bits) cut the tab of the panel with the same quality as a expensive automated system but at a much lower cost. Features include, interchangeable guide rails designed for safety, an integrated vacuum system located directly on the guide rail to remove circuit board dust from the work area, ESD steel table construction with an Equipotential Bonding Point to protect against electro-static discharge, a wide selection of milling cutters (bits) with specific geometric shapes, locking casters for portablitly, and much more.Send to a Friend
The C5028 is a handpiece rework fixture for use with the HAKKO FR-810, FR-810B, and FR-811 hot air rework stations. This fixture is smaller than the large C5029 fixture and does not include the large metal platform plate or component tray.Send to a Friend
An advanced SMD rework station with vacuum pickup and a multitude of features for every need. When integrated with a bottom heater, board fixture and vision system, the FR-811 is a complete SMD rework system and the ideal choice for bottom terminated components.Send to a Friend